|
|
AGS Secure Map Service
Article ID: 282
Last updated: 14 Aug, 2018
Revision: 15
|
|
Views: 0
|
|
An AGS Secure Map Service monitoring point checks a Secure ArcGIS Server Map Service to verify that a valid (not blank [white]) image is returned.
The parameters that are unique to the Secure AGS Map Service include:
|
Server Name
|
DNS name of server where AGS Secure Map service is located
|
Service Name
|
Name of the Rest Map or Image Service on an ArcGIS Server. If service is under a folder, name of folder/service is needed.
|
userID
|
ArcGIS Server Admin user ID using either Windows or ArcGIS Server Security
Note: userID should be entered as encrypted information
|
UserPW
|
ArcGIS Server Admin user password
Note: userPW should be entered as encrypted information
|
Layers-0,1,2
|
These are the layers in numerical order, starting at 0 (zero), and going up as listed in the ArcServer Rest interface. Enter numbers separated by commas.
Example 0,1,2,3
|
Bounding Box
|
The Bounding Box is used when a scale dependency is utilized within the map service and no image is returned until you are zoomed in.
Bounding Box Example -70.1,44.695,-69.237,43.969
Note: Starting at ArcGIS v. 10.1, a Bounding Box is required for this check.
Note: This parameter can be retrieved from the REST interface of the service and entering the parameters to test. If not available in the Rest interface, use ArcMapâ„¢ to retrieve coordinates.
|
For non-secured AGS Map Services, refer to the AGS Map Service monitoring point script.
Obtaining Bounding Box parameters from the REST service is a several step process.
|
Step 1.1: Open your Internet browser and enter the URL for your ArcGIS® Rest interface
ArcGIS® Rest Services Example:
http://YourServerName/ArcGIS/Rest/Services
Select a Service from your list of ArcGIS® Services
|
|
In the bottom left of the browser screen, locate
"Supported Operations"
Click on [Export Map]
An Export Map Image will display in the browser window |
|
Step 1.3: Copy the Bounding Box |
|
Step 1.4: Paste the Bounding Box information in the field provided.
Note: the Bounding Box will be applied to all layers
|
Step 2: Click the [Create Monitor Point] Button |
|