License Manager ModuleAdding a License Manager Container1. Click Add Container on the left bar of the UI. 2. Click Other, click License then click next. 3. Fill out the fields in the Add a New Monitoring Container
4. Click Create Container. A new Container is added on the current Tab in the GeoMon UI. 5. Once the point has run successfully, the point will turn green, and data is now being stored. 6. Once the point/check is setup, click on the point, turn Alerting on and select the Alert Contact IDs you would like to be notified if needed. 7. Next goto the License Manager screen to continue configuration. Adding a License Manager Point to an Existing Container1. Add a new point and select – License Manager Module(New) 2. Fill out the fields in the Add a New Monitoring Point
3. Click Create Monitor Point 4. Once the point has run successfully, the point will turn green, and data is now being stored 5. Once the point/check is setup, click on the point, turn Alerting on and select the Alert Contact IDs you would like to be notified if needed. 6. Next goto the License Manager screen to continue configuration. TroubleshootingSometimes the port is unknown on which a license manager is running or the communications with the license manager is not working correctly. To aid in trouble shooting there are two parameter that can be entered in the - Enter Vendor field. FindPort - Will help find the port used by the license manager. Uses the 'Port' parameter as the starting point, normally 27000, and incrementally checks upward several ports. Debug - Creates a log entry for the COMPLETE output of the lmutil query. Good for troubleshooting issues with licenses and types. |